Description
The PCE-FB 2TS is an external torque sensor with a keyed chuck. It features a graphic display, PEAK function, and a maximum sampling rate of 1000 Hz. It also includes a USB interface and downloadable software.
The torque gauge is designed for detecting the loosening torque and tightening of screws. It can also be used as a monitoring instrument. It has a keyed chuck with two steady handles, allowing for a maximum tool diameter of 13 mm.
The torque gauge has two adjustable thresholds that can monitor screw rotation and provide an acoustic warning when limits are reached. It can be used without visual contact due to the display showing the breakaway or tightening and the current force profile. The sampling rate can be individually set up to 1000 Hz. Measurement data can be transferred to the torque gauge via downloadable PC software or stored on the micro SD card.
The torque gauge is powered by AA mignon replaceable battery packs, offering flexible use.
For further information about the torque gauge, please refer to the technical specifications below or use the contact form or call PCE. Our technicians and engineers are available to assist with any questions about the torque test instrument or any other products in the control systems, laboratory technology, measuring instruments, or weighing equipment section of PCE Instruments.
Technical Specifications:
– Maximum accuracy: 0.5% from the measuring range
– Freely adjustable measuring rate up to 1000 Hz
– 24 Bit Processor
– Keyed chuck up to Ø 13 mm
– MIN / MAX Dynamic Display (PEAK)
– Setpoint input with audible warning
– Statistical analysis on the device
– Units: Nm / N-cm / kgf-m / gf-m / lbf-in
– Multilingual: DE, GB, ES, IT
– Includes downloadable PC software evaluation software
– USB and RS-232 interface
– Overload protection max. 50%
