Description
Description / Highlights
3-Phase-Power Meter / 3-Phase Power Analyzer PCE-ND10 for permanent installation / Lighted 3.5 ” display / 2 alarm outputs / impulse output / Modbus RTU interface / IP 656 front / phase recognition / measurement and display of power, voltage, power rating, efficiency factor, phase angle…
The 3-phase-power meter / 3-phase power analyzer is able to perform current, voltage and power measurements in 3-phase systems. By using appropriate transducers, it is also possible to measure high currents and voltages with the 3-phase-current meter. The 3-phase-power meter was designed for panel-mounting in 92 x 92 mm panel cut-outs. The front of the device is protected against dust and splash water according to IP65.
The measured values are shown on the large, lighted display of the 3-phase-power meter. Via the Modbus RTU interface, the data can also be transferred. The alarm function of the 3-phase-power meter allows the set up of alarm limits which trigger an alarm signal, when the value exeeds or falls below the threshold. The settings can be adjusted by using the buttons on the front of the 3-phase-power meter.
– Power meter for panel-mounting (92 x 92 mm)
– Measurement of U, I, f, P, Q, S, PF…
– Power supply via voltage input
– Alarm function
– Recognition of false phase order
– Pulse output of active energy
– IP 65 protected front
– lighted 3.5″ LC display
– Simple installation
– RS485 Modbus interface
Specification
| Technical specifications | |
| current In | |
| 1 A | Display range: 0.00 … 1500 A Measuring range: 0.005 … 1.2 A AC Accuracy: ±0.2 % of measuring range |
| 5 A | Display range: 0.00 … 60000 A Measuring range: 0.025 … 6 A AC Accuracy: ±0.2 % of measuring range |
| Voltage L-N | |
| 230 V | Display range: 0.0 … 1.012 MV Measuring range: 195 … 253 V AC Accuracy: ±0.2 % of measured value |
| 290 V | Display range: 0.0 … 1.200 MV Measuring range: 246 … 300 V AC Accuracy: ±0.2 % of measured value |
| Voltage L-L | |
| 400 V | Display range: 0.0 … 1.752 MV Measuring range: 340 … 440 V Accuracy: ±0.5 % of measured value |
| 500 V | Display range: 0.0 … 2.000 MV Measuring range: 425 … 520 V Accuracy: ±0.5 % of measured value |
| Frequency | Display range: 47.0 … 63.0 Hz MV Measuring range: 47.0 … 63.0 Hz Accuracy: ±0.2 % of measured value |
| Active power | Display range: -9999 … 9999 MW Measuring range: -1.52 … 1.52 kW Accuracy: ±0.5 % of measuring range |
| Reactive power | Display range: -9999 … 9999 Mvar Measuring range: -1.52 … 1.52 Mvar Accuracy: ±0.5 % of measuring range |
| Apparent power | Display range: 0.00 VA … 9999 MVA Measuring range: 1.0 VA … 1.52 VA Accuracy: ±0.5 % of measuring range |
| Power factor PF | Display range: -1 … 1 Measuring range: -1 … 1 Accuracy: ±1 % of measuring range |
| Tan φ | Display range: -1.2 … 1.2 Measuring range: -1.2 … 1.2 Accuracy: ±1 % of measuring range |
| Cos φ | Display range: -1 … 1 Measuring range: -1 … 1 Accuracy: ±1 % of measuring range |
| φ | Display range: -180 … 180 ° Measuring range: -180 … 180 ° Accuracy: ±0.5 % of measuring range |
| Absorbed active energy | Display range: 0 … 99,999,999 kWh Accuracy: ±0.5 % of measuring range |
| Released active energy | Display range: 0 … 99,999,999 kWh Accuracy: ±0.5 % of measuring range |
| Absorbed reactive energy | Display range: 0 … 99,999,999 kWh Accuracy: ±0.5 % of measuring range |
| Released reactive energy | Display range: 0 … 99,999,999 kWh Accuracy: ±0.5 % of measuring range |
| THD | Display range: 0 … 100 % Accuracy: ±5 % of measuring range |
| General technical specifications | |
| Relay output | 2 outputs max. 250 V AC / 0.5 A |
| Impulse output active power | O/C (NPN) class A according to EN62053-31 voltage 18 … 27 V current 10 … 27 mA |
| RS485 interface | Modbus RTU 8N2 / 8E1 / 8O1 / 8N1 Baud rate 4800 / 9600 / 19200 / 38400 bit/s |
| Display | monochrome 3.5″ LCD, lighted |
| Supply voltage from L3 | 195 … 253 V AC / 47 … 62 Hz 246 … 300 V AC / 47 … 62 Hz |
| Operating conditions | -20 … 55 °C / 25 … 95 % RH |
| Storage conditions | -30 … 70 °C / non-condensing |
| Electrical safety | EN 61010-1 |
| Dimensions | 96 x 96 x 77 mm |
| Panel cut-out | 92 x 92 mm |
| Weight | ~ 300 g |
| Protection class | IP65 |
1x 3-phase-power meter PCE-ND10, 2 x connection clamps, 1x instruction manual
Delivery Scope
1 x 3-Phase-Power Meter / 3-Phase Power Analyzer PCE-ND10
2 x connection terminals
1 x operating manual
